MF Digital DIRECTOR 2600 - Manual (Page 5)

Mounting & Connecting Your PicoJet 6000
Printer with the MF Digital PC Series.
1. Locate the front of the mounting
plate as indicated by the yellow cir-
cle to the right.
2. Slip the groove of the mounting
plate around the white plastic knob.
See picture above (yellow circle).
3. The latch located at the rear
of the mounting plate will
line up with the “U”shaped housing
located on the rear of the MF Digital
PC Series Unit. See picture above
(blue circle).
4. After mounting the Printer, be
sure to push the printer all the way
forward then use the latch
to secure the printer to the MF
Digital PC Series Unit.
5. To wire your printer to MF Digital
PC Series please follow the wiring
diagram to the right.
Front Rear
K
E
Y