MF Digital Prism Plus SureThing Setup Guide - Manual (Page 3)

Installing the Prism Plus Printer Driver*
1. Click Start-> Settings-> Printers
2. Click Add New Printer
3. The “Welcome to the Add Printer
Wizard” window will appear (fig 1) .
Click Next.
4. In the “Local or Network Printer”
window, uncheck the “Automatically
detect installed printer” option ,
leaving the “Local printer attached to
computer” option (fig 2) and click
Next..
5. In the “Select a Printer Port” window,
leave the default as LPT1 (fig 3) and
click Next.
6. In the “Install Printer Software”
window, click the “Have Disk” button
(fig 4). You will then be prompted to
“Install from Disk”, click the
“Browse” button (fig 5). Select the
location of the printer driver from
your CD-ROM drive in the PC ( fig 6).
fig 1
fig 2
fig 3
fig 4
fig 5
fig 6
* Pre-Installed on 21XX,
31XX and 91XX Series.
Excluding 9100 Baxter
rev. 11-29-06