beautypg.com

MF Digital Cougar 6600 Client User Manual

Page 3

background image

Press the “START/YES” key, you will see:

Press the “Stop No” key if the network does not use DHCP or
press the “START/YES” key if the network does use DHCP. If
you press the ““START/YES” “ key you will be prompted to
Restart the system, if you press the “Stop No” key you will see:

Enter the 4 sets of numbers of the IP address, one set at a time.
After each octet press the “START/YES” key. Do not enter an IP
address of a machine that is already on the network. When you
have entered in the entire IP address, you will see:

Enter the 4 sets of numbers of the subnet. Pressing
“START/YES” after each set. You will then see:

Press the “START/YES” key and then restart the system by
turning it Off and On again.

Page 3