Make Noise Mysteron - Manual (Page 6)

Mysteron Interface (cont’d)
13
17
18
16 19
12. DEPTH: sets how much the waveguides are Mutated. Operates as Combo Knob, with nothing patched
to DEPTH CV IN, works as standard panel control. With Signal Patched to DEPTH CV IN,
works as attenuator for that signal.
13. DEPTH CV IN: unipolar control input. Range 0V to +5V.
14. TYPE: sets the Type of Mutation.
15. TYPE CV Attenuator: uni-polar attenuator for TYPE CV IN.
16. TYPE CV IN: control signal input for TYPE. Range 0V to +5V.
17. Generation: sets feedback of the output of the waveguides back to their inputs. No feedback at NOON,
CCW from NOON is De-Generative Feedback. Cw from NOON is Re-Generative Feedback.
18. Generation CV Attenuator: bi-polar attenuator for Generation CV IN.
19. Generation CV IN: control signal input for Generation. Range +/-4V.
20. !! IN: Gate input for determining algorithm behavior. With MUTATION DEPTH Full CCW, changes
response of EXCITE parameter for bowed attack. With MUTATION DEPTH not full CCW, cross
couples feedback paths of waveguides into each other. Mystery LED Flashes to indicate.
Requires Clock/ Gate signal amplitude of at least 1.5V and width of at least 6ms.
15
14
12
20