Luma Comfort EC45S Manual - Manual (Page 9)

9
Say Goodbye to Ugly Products
After the tank is filled with water, connect the evaporative cooler to a power
outlet. The unit will beep twice, indicating that the power source is connected.
The cooler will be in standby mode at this time.
ON/SPEED & OFF Buttons
Press the ON/SPEED button to turn on the evaporative cooler.
To adjust the fan speed, press ON/SPEED button again until your desired
speed has been reached. The current fan speed will be indicated on the display
panel. To turn the unit off and revert back to standby mode, press the OFF
button.
Fan Speed
Indicators:
LOW MEDIUM HIGH
COOL/HUMIDIFIER Button
Cooler/
Humidifier
Indicator
After the desired fan speed has been selected, press the
COOLER/HUMIDIFIER button to activate the
cooling/humidifying function. This powers the water pump,
cools the air and adds moisture to your air at the same time.
The blue cooling icon will also be visible on the display
panel.
MODE Button
The EC110S has 3 different automatic airflow modes. Setting the airflow mode
is optional.
Manual Mode
Manual Mode
– Indicated by the three circular icons
on the display panel, this allows you to set the fan
speeds manually.