Luma Comfort EC220W Quick Start - Manual

EVAPORATIVE COOLER QUICK START GUIDE
EC220W
Before You Start
1. Check to ensure that all parts are included:
a. Evaporative cooler
b. Hose connector
c. PVC pipe
d. Owner’s manual
2. Place cooler on firm, level surface.
3. Before operation, clean the water tank with a
solution of warm water and light detergent.
4. For continuous operation, install the hose connector
to the inlet on the back of the cooler and connect to
a standard garden hose using the supplied PVC pipe.
NOTICE: The evaporative cooling function of this unit is
optimized to work in hot and dry climates. Excessive
humidity (higher than 60%) will reduce the cooling
effectiveness of any evaporative cooler. Allow ample
ventilation in the location of the evaporative cooler to
ensure proper operation.
Basic Operation
1. Fill the water tank through the water inlet.
2. Connect to a power supply and turn the SPEED
dial to begin fan operation.
3. Turn the COOLER dial to the “ON” position to
begin cooling.
For full operation and safety information, please read
the owner’s manual that accompanies this product. For
further assistance, contact Luma Comfort at 1-866-737-
6390 or visit our website at www.LumaComfort.com.
Water / Ice
Inlet
Continuous
Water Inlet