Luma Comfort EC45S Quick Start - Manual

EVAPORATIVE COOLER QUICK START GUIDE
EC45S
Before You Start
1. Check to ensure that all parts are included:
a. Evaporative cooler
b. Ice pack
c. Remote control
d. CR20323V battery
e. Owner’s manual
2. Place cooler on firm, level surface.
3. Before operation, clean the water tank with a
solution of warm water and light detergent.
NOTICE: The evaporative cooling function of this unit is
optimized to work in hot and dry climates. Excessive
humidity (higher than 60%) will reduce the cooling
effectiveness of any evaporative cooler. Allow ample
ventilation in the location of the evaporative cooler to
ensure proper operation. Placing the unit in front of an
open window or door will allow sufficient fresh air for
optimal cooling.
Basic Operation
1. Fill the water tank. Do not fill above MAX line.
2. Press ON/SPEED button to turn cooler on. Press
again to select fan speed.
3. Press COOLER/HUMIDIFIER button to activate
cooling function.
4. Press MODE button to select airflow options.
For full operation and safety information, please read
the owner’s manual that accompanies this product. For
further assistance, contact Luma Comfort at 1-866-737-
6390 or visit our website at www.LumaComfort.com.
ON / SPEED
COOLING
MODE
WATER TANK