Longshine LCS-WRN-3211 - Manual (Page 29)

Wireless 11n Router
28
3.5.5 WDS Settings
When you use this device as WDS or AP+WDS mode, “WDS Setting” function can be operated.
Wireless Distribution System allows the router to communicate with other APs wirelessly. To make
it work, you must ensure that these APs and the Router are in the same channel. Please add
these APs MAC address and comment values into the WDS list. Don’t Forget to Enable the WDS
by click the check box of “Enable WDS” and press “Apply Changes” button to save. To Delete the
AP on the list, Click the check box in the select item and click the “Delete Selected”. If you want to
delete all APs on the list, click “Delete All” to remove all of them.
Items Information
MAC Address & Comment Fill in the MAC address that you wish to control, and give a
definition to it.
Data Rate The transmit limitation of data packets of this wireless router.
The wireless router will use the highest possible selected
transmission rate to transmit the data packets.
Current WDS AP List Lists the WDS Settings you have added before. Click on the
list to change configuration. To Delete the station on the list,
mark the check box in the select item and click the “Delete
Selected”. If you want to delete all stations on the list, click
“Delete All” to remove all of them.
3.5.6 Site
Survey
This page shows available wireless network information. When you use this device as a client
station (STA), you may connect to other AP or Router. Select one of the lists in the site survey
table and click on to connect to other wireless network nearby. The button