Longshine LCS-WRN-3211 - Manual (Page 23)

Wireless 11n Router
22
Items Information
Fragment
Threshold
This value should remain at its default setting of 2346. If you
experience a high packet error rate, you may slightly increase your
fragmentation threshold within the value range of 0 to 2346. Setting
the fragmentation threshold too low may result in poor performance.
RTS Threshold
Request To Send threshold. This value should remain at its default
setting of 2347. If you encounter inconsistent data flow, only minor
modifications to the value range between 1 and 2347 are
recommended.
Beacon Interval
Beacons are packets sent by an access point to synchronize a
wireless network. Specify a beacon interval value. Default (100ms)
is recommended.
Preamble Type
The length of CRC blocks in the frames during the wireless
communication.
IAPP
To enables multiple AP to communicate and pass information
regarding the location of associated Stations.
Protection
Some 802.11g wireless adapters support 802.11g protections,
which allows the adapter search for 802.11b/g singles only. Select
“Enabled” to support protection or select “Disabled” to disable this
function.
Aggregation
To aggregate lots of packets into a big one before transmitting
packets. This can reduce control packet overhead.
Short GI
Indicates that the 802.11g network is using a short slot time
because there are no legacy (802.11b) stations present