beautypg.com

Chapter10 the init button – Longshine LCS-US204 User Manual

Page 42

background image



42

Chapter10

The Init Button


The Init button is used for maintenance: Simultaneously press Init button and turn
on (by plugging in the power adaptor) the Server until USB1 and USB2 LED indicators
simultaneously blinks. After that, the Server will do the following tasks:
A.

Perform a Factory Default restoration of the server, which will restore most of the
parameters and settings to factory default values.

B.

Perform a TFTP server. You can upgrade new firmware using any TFTP client tool.


Note: After performing the tasks mentioned above, you have to plug off the power
adaptor and then plug in the power adaptor to restart the Server.

See also other documents in the category Longshine Equipment: