Longshine LCS-PS112 - Manual (Page 55)

DHCP
The print server supports DHCP feature, allowing the print server to obtain an IP address and
related TCP/IP settings automatically from a DHCP server. While the print server supports
DHCP, we strongly recommend you manually specify a fixed IP address to the print server.
By default, the print server’s DHCP function is disabled.
Windows NT LPR Port Printing Installation
1. Click
Start, point to Settings, and select Printer.
2. Run
Add Printer.
3. The Add Printer Wizard screen will appear, Select My Computer and click Next.
4. Click
Add Port.
5. From the Printer Ports box as shown in the following picture, select the LPR Port.
6. The Add LPR compatible printers box will then appear as shown in the following picture.
Type in the IP address assigned to the print server in the Name or address of server
providing lpd box.
7. In the Name of printer or print queue on that server box, type in a printer name, e.g.
lp1 for port-1, lp2 for port-2 and lp3 for port-3 of print server. Click OK.
55