Lippert Components Embedded Rack Slideout System - Manual (Page 3)

SYSTEM
WARNING
FAILURE TO ACT IN ACCORDANCE WITH THE FOLLOWING MAY
RESULT IN SERIOUS PERSONAL INJURY OR DEATH.
The Lippert Embedded Rack Slideout System is intended for the
sole purpose of extending and retracting the slideout room. Its
function should not be used for any other purpose or reason than
to actuate the slideout room. To use the system for any reason
other than what it is designed for may result in damage to the
coach and/or cause serious injury or even death.
Before actuating the system, please keep these things in mind:
1. Parking locations should be clear of obstructions that may
cause damage when the slideout room is actuated.
2. Be sure all persons are clear of the coach prior to the
slideout room actuation.
3. Keep hands and other body parts away from slideout
mechanisms during actuation. Severe injury or death may
result.
4. To optimize slideout actuation, park coach on solid and level
ground.
DESCRIPTION
The Lippert Embedded Rack Slideout System is a rack and pinion style slide
system. Utilizing a bi-directional electric motor to actuate the drive shaft, the
slideout room is extended and retracted from the same source. The actuator
has a built-in automatic clutching feature. The Lippert Embedded Rack Slideout
System is designed as a negative or positive ground system.
There are no serviceable parts within the electric motor. If the motor fails, it must
be replaced.
Disassembly of the motor voids the warranty.
Mechanical portions of the slideout system are replaceable. Contact Lippert
Components, Inc. to obtain replacement parts.
3