Lippert Components 07-10 Tundra Camper Tiedowns - Manual (Page 3)

Mandatory Rear Bumper Brace
This brace is designed to reduce rotational torque
on the rear bumper. The upper end bolts to existing
hole in underside of bed cross member. At the lower
Or bumper end of the brace, the lower edge of the
Bumper is sandwitched between the heavy steel
Plates supplied in this kit. See photos and illustrations..
The hardware kit supplied contains two longer
and two shorter bolts. The longer bolts are used
at the bottom (bumper) end and the shorter bolts
at the upper (under bed) end of the bumper
brace.
Bumper End
Bolt
Flat Washer
Lock
Washer
Nut
Bu
m
pe
r
Bra
ce
Bottom
Edge of
Bumper
Bumper Profile
Th
is
en
d
to
b
ed
cr
os
s-
m
em
be
r
Technical support: 801-544-2585
Existing hole in
Vertical plate at
End of cross
Member behind
fender well.
Be
d
cr
os
s-
m
em
be
r
Upper end of bumper brace
Attaches here.
Bu
m
pe
r Br
ac
e
Existing
Bumper
Support
Inside surface
of bumper