beautypg.com

Retracting the awning – Lippert Components Solera® Manual Awning Crank Style User Manual

Page 4

background image

Rev: 07.30.2014

Page 4

Solera Manual Awning - Crank Style

Fig. 9

Fig. 10

Retracting the Awning

1. Insert the hook end of the crank handle into the eye bolt on the drive head (Fig. 6).
2. Turn the crank handle in a clockwise direction until the awning is fully retracted (Figs. 7 and 8).
NOTE: Keeping handle even with the roller tube makes it easier to turn.
3. Locate the locking latch (Fig. 9) (if equipped) on the drive side awning arm. Lock the latch to secure the

awning in place (Fig. 10).

NOTE: This latch is optional and may not be installed. If not installed, awning is secured and ready for

transportation.

Fig. 6

Fig. 7

Fig. 8

See also other documents in the category Lippert Components Hardware: