Levana Stella - Manual (Page 9)

LET’S GET STARTED!
Battery Installation
1. Gently remove the BATTERY COMPARTMENT COVER on the back of
the monitor.
2. Slide the BATTERY COMPARTMENT COVER down to remove.
3. Insert the battery; the battery connectors on the battery should line up
with the connectors inside the battery compartment.
4. Slide the BATTERY COMPARTMENT COVER back into place.
PEEP Mode: After 1 minute of inactivity, monitor enters standby/sleep mode.
Adjustable Brightness: Decreasing screen brightness will extend battery life.
6. For extended periods of non-use, please remove battery from baby monitor.
SETUP
Get the Most Out of Your Rechargeable Battery
1. Fully charge battery (6-7 hours) before first use.
2. To maximize battery life, charge battery before battery is fully drained.
3. Avoid extreme heat or cold as this will affect the life of the battery.
4. Turn LCD screen OFF; press POWER
button on the top of the monitor ONCE.
5. Stella ™ menu settings that increase battery life:
Battery
connectors
Battery
connectors
+ –
9 mylevana.com