LABEC M-PL-600 - Manual (Page 7)

MTC icon：the temperature displays is manual entered, pH manual
ure displays is actual measurement value, pH
tem
Ic n Cal1、Cal2、Cal3：
on
Icon
icon
Icon
temperature compensation.
ATC icon：the temperat
perature auto compensation.
on ⑦：PH sensor calibration ico
Cal1 icon：first point pH calibration
Cal2 icon：second point pH calibrati
Cal3 icon：third point pH calibration
⑧：PH sensor performance icon
Offset icon：pH sensor zero point
Slope
icon：pH sensor slope icon
⑨：Measurement data storage, back display icon
icon：measurement data storage icon
icon：stored measurement data back display
5. Opera
has 6 operation keys，as follows：
ON/O t, but the power
E: Function key. To be used to switch between measurement
.
CAL：Ca
increase）、
getting stable, is used to store the
m
and calibration, when sample temperature is
unde
tion key
The instrument
FF: Power key. When switch off the instrumen
adaptor has not plugged from the AC220V socket, the instrument is in hold
mode.
MOD
functions（pH measurement function/mV measurement
function）.Long key used to functional parameter setting
libration key. To be used to pH sensor calibration.
M+/∧ ： Storage key、manual temperature setting key（
functional parameter setting key.
After the measurement data
easurement information.
During pH measurement
r MTC status, is used to setting the sample temperature manually.
（increase）。
- 6 -