LABEC J-NBT - Manual (Page 6)

Operation Manual
J-NBT-M-E-09-001(REV.01)
P a g e 5
SAFETY SYMBOLS
This operation manual and this product use the following safety symbols.
Please keep in mind the meaning of each of the symbols to ensure safe use of the product and to
prevent any damages, accidents, or problems resulting from negligence of these safety symbols. (As
using symbols may depend on the product, not all of the symbols may be used.)
SAFETY SYMBOLS
! Indicates the possibility of personal injury or death. Never fail to
follow the operating procedure.
! Do not proceed beyond a WARNING sign until the noted
conditions are fully met to satisfactory and understood.
! Indicates the existence of possibility of damage to the product or
to the operator in operation.
! Never fail to follow the operating procedure.
! Indicates the existence of possibility of damage to the product or
to the operator in operation when cautions are not observed and
followed properly.
! Indicates additional information such as general warning, caution,
risk of danger, and operating procedure.
! When this mark is indicated on the product, refer the relevant
section of the Operation Manual.