LAARS Mighty-Stack TL00-199 - Installation, Operation and Maintenance Instructions - Manual

Installation, Operation and Maintenance Instructions Document 2118A
H2206000A
These instructions are to be stored next to the water heater for reference purposes.
FOR YOUR SAFETY: This product must be installed and serviced by a professional service technician,
qualified in hot water heater installation and maintenance. Improper installation and/or operation could
create carbon monoxide gas in flue gases which could cause serious injury, property damage, or death.
Improper installation and/or operation will void the warranty.
WARNING
If the information in this manual is not followed exactly, a fire or explosion may result
causing property damage, personal injury or loss of life.
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or
any other appliance.
WHAT TO DO IF YOU SMELL GAS
• Do not try to light any appliance.
• Do not touch any electrical switch; do not use any phone in your building.
• Immediately call your gas supplier from a nearby phone. Follow the gas supplier's
instructions.
• If you cannot reach your gas supplier, call the fire department.
Installation and service must be performed by a qualified installer, service agency, or gas
supplier.
Installation,
Operation and
Maintenance
Instructions for
Mighty-Stack ™
Gas-Fired
Water Heater
Model TL00-199
A subsidiary of BRADFORD WHITE Corporation