KERN & SOHN SCD-4.0 User Manual
Page 9
SCD-BA-e-1444
9
3.3
“Balance“ window
To enter the type of balance used by you go to
BALANCE
.
3.3.1 Select predefined type of balance
On delivery the software contains predefined type records for KERN balances.
Please not that all settings belonging to the respective type of balance will
automatically be entered under settings/interface when selecting a predefined type.
All that may be left to correct could be the matching COM connection.
Click on the
BUTTON
and a selection menu will appear. Scroll up or down,
using or and select the desired balance.
Balance Connection is only fully operational, when the balance is set to
the weighing mode. Applications (e.g. piece counting) are not supported
by Balance Connection.
Models KERN ABT, ACS/ACJ, ABS/ABJ, PBS/PBJ
Activate the setting „Handshake off“ in the menu. For further information
on how to operate your balance please refer to the operating instructions
supplied with each balance.