KERN & SOHN SCD-4.0 - Manual (Page 15)

SCD-BA-e-1444 15
3.5 “Data transfer“ window
Possible setting options include:

VALUE : Select whether a transmitted value is to be displayed in the application
program. It is possible to define a macro (This example showing {TAB}, that is,
the cursor jumps to the next table segment after each data transmission).

UNIT : Transmitted values are transmitted to the application in the unit selected
for the balance. It is possible to define a macro that is executed immediately
after transmission.

DATE : Dependent on necessity, transmission of date can be selected either with
or without macro.

TIMR : Transmission of values additionally with statement of time, optionally in 12
or 24 hour mode It is also possible to define a macro.

S OUND SIGNAL ON RECEPTION OF DATA : Determine whether each successful data
transmission from the balance to the PC should be followed by an acoustic sound
signal. This enables you to monitor acoustically whether data received from the
balance has been transmitted to your application.

Click KEYBOARD or TIMER and define whether a data transmission of selected
remote control commands (See chpt. 4.1    ) takes place each time a
predefined key is pressed or whether this should take place timer-controlled (time
interval includes seconds, minutes and hours for exact definition). We have
chosen the F2-key for our example.