KERN & SOHN EOE XL - Manual (Page 21)

Plus/minus
weighing Ö For example for item weight check, production check etc.
switch-on the balance using ON/OFF button and wait for
zero display.
Ö Put the nominal weight on the weighing plate and tare to
zero using
TARE key. Remove the nominal weight.
Ш
Ц Put the test objects subsequently on the weighing plate, the
respective deviation from the nominal weight is displayed
with the respective sign to „+“ and „-“ (e.g. + 0.037 g).
According to the same procedure also packages with the
same weight can be produced, referring to a nominal
weight.
Ö Back to weighing mode by pressing the TARE button.
EOB/EOE_L/EOE_XL/EOS-BA-e-1030 21