Cobra Electronics 15 BAND XRS 9770 - Manual (Page 13)

To Turn X, K and/or Ku Mode On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to X, K or Ku band.
Tone Visual Display
Two beeps X-Band On
One beep X-Band Off
Two beeps K-Band On
One beep K-Band Off
Two beeps
One beep
Ku-Band On
Ku-Band Off
Nothing Comes Close to a Cobra ® 21
Settings
Your Detector
20 English
Settings
Your Detector
To Turn VG-2 Detect Mode On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to VG-2 Detect.
Tone Visual Display Voice
Two beeps VG2 On VG2 On
One beep VG2 Off VG2 Off
To Turn VG-2 Audio Mode On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to VG-2 Audio.
Tone Visual Display Voice
Two beeps VG2 Audio On VG2 Audio On
One beep VG2 Audio Off VG2 Audio Off
VG-2 Detect On
VG2 On
VG-2 Detect Off
VG2 Off
VG-2 Audio On
...Audio On
VG-2 Audio Off
...Audio Off
VG-2 Alert
The detector is undetectable by VG-2 detection devices and will alert you when
such a device is in use near your vehicle. During the alert, the unit continues to
detect other signals. You can choose whether or not you want your unit to show
VG-2 Alerts. With VG-2 Detect mode On, you can also choose whether or not you
want your unit to sound audible VG-2 Alerts.
The factory settings are VG-2 Detect Off and VG-2 Detect Audio Off.
Pop Alert
The Pop Mode Radar Gun is a single-pulse Doppler radar that is a feature
of a K and Ka (Bee III Ka radar gun) band Instant-On radar gun. It uses
a single, short-time pulse to measure the target vehicle’s speed.
The Pop mode receiver senses Pop singles beyond the effective range of Pop
radar guns. As the Pop mode receiver is so sensitive, you should limit the use of
Pop Detect mode to highway and rural driving.
Pop Alert will alert you to Pop radar signals. During the alert, the unit
continues to detect other signals. The factory setting is Pop Detect Off.
To Turn Pop Detect Mode On or Off Using Program Mode
(See Page 7 For Instructions on Using Program Mode)
In Program mode,
go to Pop Detect.
ToneVisual Display Voice
Two beeps Pop On Pop On
One beep Pop Off Pop Off
Ku-Band On
Ku-Band On
Ku-Band Off
Ku-Band Off
X-Band Off
X-Band Off
K-Band On
K-Band On
K-Band Off
K-Band Off
X-Band On
X-Band On
Pop Detect Off
Pop Off
Pop Detect On
Pop On
K, Ku and X Band Detection
The new Ku Band may be introduced to North America in the future. To prevent false
alerts until it is, the factory default for Ku Band detection is Off. In parts of North
America, annoying false alerts from door openers and similar devices are triggered on
the X Band and K Band. If desired, X Band or K Band can be turned Off. The factory
default for X Band and K Band detection is On.
XRS9770_MANL.indd 20-21 8/30/10 8:39 AM