Kenton LD2Pro - Manual (Page 4)

4
FACTORY DEFAULTS
If you want to reset your LD-2 to its factory default settings, you can do so by applying power to the unit
whilst holding the learn button pressed.
`Fd` (factory defaults) will momentarily be displayed when this has been done.
The factory default settings are:
MIDI channel #1
Controller #7 (MIDI volume)
Numeric display in 0-127 mode
SPECIFICATIONS
Power Input 9-12V DC – mains adaptor supplied (or phantom power from LD-3 or 4
Power
300mA, 2.1mm plug (centre positive)
MIDI
In only
Display
3 x 7 segment display and 2 x 10 segment bargraph
Weight
285 gms
Dimensions
119 x 54 x 40 mm
Non-volatile memory
EEPROM (no back-up battery required)
WARRANTY
The LD-2 comes with a 12 month (from purchase date) back to base warranty, (i.e. customer must
arrange and pay for carriage to and from Kenton Electronics).
Kentron Electronics Limited
Brookfarm House, Station Road, South Wimbledon, London, SW19 2LP, UK
Tel: +44 (0)20 8544 9200 Fax: +44 (0)20 8544 9300
[email protected] www.kenton.co.uk
rev# 1127 e. & o. e.  29 TH July 2008