beautypg.com

Kenton Modular Solo User Manual

Page 16

background image

16

MIDI analyser mode:


The MODULAR SOLO has a built-in MIDI analyser function. This feature allows you to see what types
of MIDI messages are being transmitted by your master keyboard/sequencer making the MODULAR
SOLO a useful diagnostic tool.

To enter analyser mode, you must power on the MODULAR SOLO whilst holding the SELECT button.
The display will then show ‘rC’ for receive channel & status mode. This means the display will show the
MIDI receive channel of any messages it receives in the right hand two digits, and will show status in
the left digit – this is explained further down the page.
Using the INC, DEC, and SELECT buttons, different types of MIDI messages received may be
displayed:


SELECT

Short press

[rC] Receive channel & status

Long press

[PC] Program change

DEC

Short press

[nt] Note number

Long press

[nv] Velocity

INC

Short press

[Cn] Controller number

Long press

[Cv] Controller value


For whichever of the above selected, the MODULAR SOLO will display the value it receives for the
type of message currently selected.
Although pitchbend and after-touch are not strictly controllers, when Controller number [Cn] mode is
selected, ‘pb’ will be displayed if a pitchbend message is received, and ‘af’ will be displayed if an after-
touch message is received.
If Controller value [Cv] mode is selected, and pitchbend or after-touch messages are received, their
values will be displayed.
When Receive channel & status [rC] mode is selected, the right hand 2 digits show the received MIDI
channel (if applicable) and the left hand digit operates as a received MIDI message indicator. LED
segments will flash when then following types of messages are received: Note on, Note off, Sysex,
Timing clock (MIDI clock), Start, Stop, Continue.


















The top left dot (any MIDI message) operates in all modes, not just for Receive Channel & Status
mode.

To exit MIDI analyser mode, the power switch of the MODULAR SOLO must be turned off then on
again.

Any MIDI

message

Clock start

Clock
continue

Note off

MIDI clock

Clock stop

Sysex

Note on