Verykool i123 - Manual (Page 5)

i123(verykool) User Manual_V1.0
Proprietary & Confidential -3-
2) Place the back cover of the battery onto the phone squarely, and push upward till it
clicks into place.
※ Note: Do install the battery as the diagram so as prevent the battery contact patch being
damaged. ※
2.2 Charging the battery
Your phone is powered by a rechargeable battery. When the battery is
weak, the battery sensor informs you. At this time, you need charge the
battery. When the battery becomes too weak for the phone to operate, it
switches off automatically.
1) Connect the charger to a power socket.
2) Connect the charger to the charger jack on the phone.
3) Wait until the battery is completely charged. During charging, the
charging icon is displayed in animation. When the charging icon
becomes static, the battery is fully charged.
4) Disconnect the charger from the phone. Disconnect the charger from the power socket.
2.3 Inserting the SIM card
The mobile support two SIM cards on-line at one time. The method of the two SIM cards of
inserting or removing is the same.
1) Power off the phone; remove battery and other external power
connection, as shown in the image.
2) Insert SIM card into SIM card socket.
3) When you need to remove SIM card, please power off the
phone first, remove battery, then remove the card.
2.4 Installing T-Flash card
T-Flash card slot locate at the right top of the SIM card. Insert
memory card into card slot as shown in the image.
※ Note: No micro SD card is delivered in the product package. The micro
SD card is sold separately. ※
2.5 Power On or Off
Make sure the battery is already inserted:
1) Power On: Hold down end key until the phone-on image display. After power on, the
phone searches for your network automatically. Some SIM card is protected by the PIN
number, if you are asker for inputting the PIN number, please enter it, then press
middle key.
2) Power Off: Hold down end key until the power-off image display.
※ Note:
(a) PIN is provided by your service provider. If the PIN is entered incorrectly three times, the
SIM card is barred.
(b) If the phone asks for an unlock code when switched on, enter the unlock code and press
middle key. ※
3 Call Functions
3.1 Making a Call
When you want a call, press the phone keypad to input the area code and phone number.
Click middle key to save.
Pressing * key a few times until character “+” appears, and then you can dial an international