Verykool i315N - Manual (Page 15)

the dial key or click the dial button on the screen to start the call. If you need to
change the phone number, press the clear key to delete typed characters. Dial-up
display shows when the SIM card, call the animation and logo. After answering each
call is shown on the display status information, if you open the tone connected, there
will be a tone.
To hang up, press {ON/OFF} key.
Area code + phone number + dialing keys
Ø Dial the extension:
Some fixed telephone extension can not directly dial, you need to dial the
switchboard, dial the extension. If you enter a phone number, extension number in the
switchboard number and symbol inserted between the pause character "P", the
machine will dial it for you automatically dial the extension. Enter "P" method is to
press the * key (in this case appears on the display symbol "P")
Area Code + Tel No + P + extension number + dial keys
Ø International calls
To make international calls, you can press the * key until the display international call
prefix symbol "+", which will allow you do not know the local international telephone
prefix number (example: in China, 00), from any States call.
Enter the prefix number, then enter your country code to dial the phone number and
complete. Country code is a usual practice, Germany 49, Britain 44, Sweden 46 and
so on.
Like the usual long distance calls, dial the city code should be removed in front of
"0."
For example: calls from other countries, telephone lines should be allocated:
+86 21114
+ Country code + phone number + the complete dial keys
Ø Emergency calls
If the phone is in network coverage (check the phone display through the upper left
corner of the network signal strength indicator that), you should be able to call
emergency services (even if the SIM card can not make emergency calls.) If your ISP
does not provide roaming services in the region, the display will show "no service", to
tell you only for such calls.
3.2.2 Answer the call
Ø Under normal circumstances, there is an incoming call, press the answer key or
click the option to receive calls; press END key or touch the end of the call
button, end the call.
Ø If the headset is plugged in, you can also use the buttons on the headset to answer
15