Verykool i277 - Manual (Page 21)

n Outdoor for use in outdoor activities. This requires presetting (for
example, you can set raise the volume of the receiver and ring
tone).
n Indoor for use in indoor activities. This requires presetting.
n Headset for use in headset activities, this mode will activate when the
earphone is inserted. This requires presetting (for example, you
can lower the volume of the receiver and ring tone).
n Bluetooth for use in Bluetooth activities, this mode will activate when
connecting to a Bluetooth device.
Note: These five profiles have already been set and the default profile is
“General” when the mobile phone leaves the factory. On standby, you can long
press the # key to turn silence on or off.
Press the up/down keys to select a profile, then click the “Options”:
Activate: to activate selecting profile.
Customize: for you to customize the profile.
Select “Customize” menu, it will display the menu as follows:
n Tone Setup: customize different ring tones with different option, for example,
incoming call, power on or off, and so on.
n Volume： Two type of volume can be set: Ring Tone (including incoming
call, alarm, power on, power off, message tone) and Key Tone
(associated with key press).
n Alert Type： set the kind of alert for incoming calls. You can select from four
types: Ring Only/Vibration Only/Vibration and Ring/
Vibration then Ring.
n Ring Type： set the mode of ring, including Single, Repeat and Ascending.
n Extra Tone： The user can turn on or off the tone as follows: Warning,
Error, Camp on and Connect.
n Answer Mode ： The user can select different modes for answering: Any Key
(except for the Hang-up key, right soft key) and Auto (when the
earphone is inserted)
4.11 Extra
4.11.1 Calculator
Click the buttons on the screen to calculate.
4.11.2 Unit Converter
Select from the unit options to convert.
4.11.3 Currency converter
Select the currency to convert.
4.11.4 Stopwatch
In this menu you can use the Typical stopwatch and nWay stopwatch.
4.12 Services
4.12.1 STK*
Press the up/down keys to select “STK”. Press the left soft key to enter the
“STK” main menu. Here you can use the value-added services provided by your
network operator.
- 21 -