Vermont Casting 6000 - Manual (Page 15)

15
Assembly Step 5 - Assemble the Grill Lid
1.
2.
3.
4.
Place the heat indicator onto the front of the
grill lid, lining up the 3 prongs with the 3
mounting holes.
From the inside of the lid, secure the heat
indicator with the 2 push nuts.
Position the back of the lid so that the rear
holes are in line with the hinge struts on the
back of the grill bottom.
Gently set the grill lid onto the grill bottom.
USE HARDWARE BAG D :
flat-head
screwdriver
standoff
gasket (2)
1/4-20 x 5/8”
bolt (4) hairpin (2)
1/4-20 hex
nut (4)
LOCATE THESE PARTS:
1/4” x 1-1/8”
hinge pin (2)
7/16”
wrench
Tools Needed:
grill
lid (1)
Heat Indicator (1)
Push Nuts
for Heat Indicator (2)
handle
standoff (2)
handle (1)