beautypg.com

What to do if – Cooper Lighting N175MV User Manual

Page 5

background image

5

What to do if…

LIGHT DOES NOT
COME ON

O R

LIGHT COMES ON FOR
O N LY A FEW SECONDS

Is there power to the fixture?
• Has the circuit breaker tripped?
• Is the wall switch ON?
Is the bulb screwed in completely?
• Is the bulb good?

(Be careful not to overtighten.)

Is the sensor functioning properly?
• Is the sensor locked in place?
• Is light being reflected into the sensor, causing the

fixture to turn off?

Is the wiring to the unit loose?

TURN OFF POWER BEFORE CHECKING

• Is the unit properly grounded?

LIGHT STAYS ON

OR

LIGHT CYCLES ON
AND OFF

Is the light sensor receiving enough light?
• Change the direction of the light sensor by

loosening the screw in the center of the sensor
receptacle. N O T E : Do not loosen screw more
than 1-1/2 turns. After loosening screw, carefully
turn receptacle in desired direction. Tighten
screw and reinstall sensor. Do not rotate more
than 360 degrees.

Call for customer service and/or missing or damaged parts (800-334-6871)

N175MV_325-1511.qxd 11/1/05 2:24 PM Page 5