N175mv – Cooper Lighting N175MV User Manual

Page 2

N175MV

Call for customer service and/or missing or damaged parts (800-334-6871)

C o n g r a t u l a t i o n s. You have purchased a dusk to dawn security light. This fixture
will provide years of convenience and protection for your home or business.

How it works

Your dusk to dawn security light features a light sensor that automatically turns
the light on at dusk and off at dawn.

What you need (not included)

• Screwdriver

• Drill with 3/16" drill bit

• Adjustable wrench

• 1/2" diameter, flexible conduit

• (2) 1/2" conduit connectors

What’s included

• Fixture housing (A)

• One-piece lens assembly (B)

• Bulb (C)

• Light sensor (D)

• (2) Lens assembly screws (E)

• (2) Washers (F)

• Access cover (G)

• (4) Hex head lag screws (H)

• Two piece mounting bracket (I)

• Conduit connection cap (J)

• (2) Small screws (K)

• (1) 1/4 - 20 carriage bolt (L)

• (1) 1/4 - 20 hex nut (M)

• Extension arm (N)

What to know

• For outdoor use only.

• cULus Listed for wet location use.

• Fixture must be connected to a 120 Volt, 60 Hz power source. Any other

connec tion voids warranty.

• Fixture should be installed by persons with experience in household wiring

or by a qualified electrician. The electrical system, and method of electrically
connecting the fixture to it, must be in accordance with the National Electrical
Code and local building codes.

N175MV_325-1511.qxd 11/1/05 2:24 PM Page 2