Chicago Electric 90715 - Manual (Page 4)

Page 4 SKU 90715
15. Do not overreach. Keep proper footing and balance at all times. Proper footing and
balance enables better control of the power tool in unexpected situations.
16. Use safety equipment. Always wear eye protection.
Machine Use and Care
17. Do not force the machine. Use the correct machine for your application. The correct
machine will do the job better and safer at the rate for which it is designed.
18. Do not use the power machine if the Power Switch does not turn it on or off. Any
machine that cannot be controlled with the Power Switch is dangerous and must be
replaced.
19. Disconnect the Power Cord Plug from the power source before making any
adjustments, changing accessories, or storing the machine. Such preventive safety
measures reduce the risk of starting the machine accidentally.
20. Store idle machines out of reach of children and other untrained persons. Machines
are dangerous in the hands of untrained users.
21. Maintain machines with care. Keep cutting tools sharp and clean. Properly
maintained tools with a sharp cutting edge are less likely to bind and are easier to
control. Do not use a damaged machine. Tag damaged machines “Do not use” until
repaired.
22. Check for misalignment or binding of moving parts, breakage of parts, and any other
condition that may affect the machine’s operation. If damaged, have the machine
serviced before using. Many accidents are caused by poorly maintained machines.
23. Use only accessories that are recommended by the manufacturer for your model.
Accessories that may be suitable for one tool may become hazardous when used on
another tool.
Service
24. Machine service must be performed only by qualified repair personnel. Service or
maintenance performed by unqualified personnel could result in a risk of injury.
25. When servicing a machine, use only identical replacement parts. Follow instructions
in the “Inspection, Maintenance, And Cleaning” section of this manual. Use of
unauthorized parts or failure to follow maintenance instructions may create a risk of
electric shock or injury.
SPECIFIC SAFETY RULES FOR THIS SEWING MACHINE
1. Maintain labels and nameplates on the Sewing Machine. These carry important
information. If unreadable or missing, contact Harbor Freight Tools for a replacement.
2. Always wear safety impact eye glasses. Using personal safety devices reduce the risk
for injury. Safety impact eye glasses are available from Harbor Freight Tools.