Co w ay, Installation safety – Coway EW-07GU User Manual
Page 5

4
Co
w
ay
SAFE
TY INFORM
ATION
| Elec
trical saf
et
y
| Installa
tion saf
et
y
INSTRUCTIONS PERTAINNING TO A RISk OF FIRE, ElECTRIC SHOCk, OR INjURY TO PERSONS.
Remove any dust or
water from the power
plug .
Failing to do so may result
in electric shock or fire.
If the power cord is
damaged, do not
replace the cord
yourself . Call the Coway
Service Center to have
it replaced .
Failing to do so may result
in electric shock or fire.
Installation safety
do not install the
product near a heating
device .
Failing to do so may result
in fire.
do not install the
product in areas
exposed to moisture or
water (rain) .
Failing to do so may result
in electric shock or fire.
Cold water pipe
Connect the supply
water to the cold water
pipe .
Connecting the supply
water to the hot water pipe
may cause a problem with
the product or an accident.
Use tap water
only!!
Use the tap water as the
supply water .
Using water from a temporary
water supply system or
using underground water
may cause a performance
degradation of the product.
Keep the length
2 m or shorter!
Main water
inlet hose
keep the length of the
main water inlet hose
from the main water
supply valve to the
product equal to or
shorter than 2 m .
Failing to do so may result
in performance degradation
of the product.
Keep the length
2 m
or shorter
keep the weak ionized
acidic extraction/
draining hose equal to
or shorter than 2 m .
Failing to do so may result
in performance degradation
of the product.
do not install the
product on a sloped
floor . do not apply
force or an impact to
the product .
Failing to do so may result
in injury to the user or
damage to the product.
The filtration device installation shall
comply with applicable state and local
regulations .
DANGEr WArNING CAUTION