Coway EW-07GU User Manual
Page 33
32
H
ow t
o U
se
INST
A
ll
ATION
Assembling the alkaline ionized water extraction pipe
1. Assemble the alkaline ionized water extraction pipe by turning it clockwise.
Connecting the feed water inlet and adapter
1. Install a 5/16 inch adapter and connect the 5/16 inch tubing.
When a 1/4 inch adapter is already installed for the existing water filtration system,
be sure to replace the adapter with a 5/16 inch adapter.
2. Connect the feed water inlet tubing to the elbow fitting of the main body.
Assembling the weak acid ionized water extraction/ draining hose
with the main body .
1. Cut the connecting part of the weak acid ionized water extraction / draining hose by
approximately 2 cm, and connect it to the bracket acid water connector.
Take care not to assemble the pipe incorrectly: refer to the marks and the outside
diameter of the connector.
Connecting the weak acid ionized water faucet and the hose .
1. Cut the connecting part of the weak acid ionized water extraction / draining hose by
approximately 2 cm, and connect it to the weak acid ionized water faucet.
(Draining hose: Striped hose / Acid ionized water hose: Hose with larger outside diameter)
Take care not to assemble improperly : refer to the marks and the outside diameter
of the connector.
Fixing the weak acid ionized water faucet .
1. Fix the weak acid ionized water faucet to an appropriate position such as the front or
the side of the sink, with a sucker.