Century OPERATING INSTRUCTIONS CEXT7 - Manual (Page 13)

OPERATIONS
86037910 CEXT7 03/23/07 3-6
Remove electrical cord and literature from
recovery tank. Fill solution tank (see filling
operations, page3-5).
Adjust brush to proper setting.
Note: For good operation the brush must
skim the carpet. If circuit breaker trips raise
brush to prevent damage to motor or carpet.
Plug cord into grounded outlet.
Note: Be sure dome is seated on recovery
tank, and float shut-off is installed correctly.
Turn on both Vacuum and Pump motor
switches (“ON”=“I”).
STEP
1
STEP
2
STEP
3
STEP
4
CORRECT
INCORRECT
1/8in
(3mm)
PUMP VACUUM
ON ON