Crimestopper Security Products EZ-95FM - Manual (Page 26)

26
TRANSMITTER PROGRAMMING
Transmitter Programming:
Notes: Remote Transmitters/Transceivers come pre-programmed from the Factory. When re-learning remotes or adding
remotes, ALL your system’s remote codes must be learned at time of programming!! These systems allow storage of up
to 4 different remote codes in memory. The “Sidekick” transmitters for the TW1/TW2 and FM systems are a special model
that is not compatible with each other.
1. Turn key to the ON position. (Do not start vehicle) Pink wire must be connected!
2. Press Program/Valet button 4 times. Wait for the unit to flash the parking lights and/or honk horn exactly 4 times.
3. 1-Way systems: Press Button #1 (Lock) of the transmitter to be learned. 2-Way systems: Both the Lock & Unlock
buttons must be pressed. You should get 2 light flashes and 2 horn honks indicating the code-learn. Now the unit is
waiting for a 2
nd code, so repeat this step as needed with up to 3 additional remotes. The unit will flash the lights in
succession after each code learned for up to 4 codes. (3 flashes for the 2 nd code, 4 flashes for the 3 rd code and 0 for 4 th
code.) If all 4 codes are learned, the unit will automatically exit code learning mode, otherwise turn key OFF.
IGN
OFF
WAIT FOR
4 FLASHES
PRESS 4X's
FLASH 2, 3, or 4 X's
2-WAY SYSTEMS
1-WAY SYSTEMS
IGN
OFF
PRESS TOGETHER
LOCK &
UNLOCK
PRESS
LOCK ONLY
& "SideKick" REMOTES
COMPLETE