Culligan Water Filter - Manual (Page 4)

Culligan Medallist Series ™ Water Conditioners with Timeclock or Soft-Minder ® Meter
8” Model 30 Model 45 Model
Control Valve Type 5-cycle Reinforced 5-cycle Reinforced 5-cycle Reinforced
Thermoplastic Thermoplastic Thermoplastic
Overall Conditioner Height 51 in. 49 in. 63 in.
1,295 mm 1,245 mm 1,600 mm
Media Tank Dimensions 8 x 44 in. 10 x 40 in. 10 x 54 in.
(Dia. x Ht.) 203 x 1,118 mm 254 x 1,016 mm 254 x 1,372 mm
Salt Storage Tank Dimensions 16 x 43 in. 18 x 43 in. 18 x 43 in.
(Dia. x Ht.) 457 x 1,092 mm 457 x 1,092 mm 457 x 1,092 mm
18 x 43 in.
457 x 1,092 mm
Exchange Media, Type & Quantity Cullex
®
Media, 0.7 ft 3 Cullex Media, 1.0 ft 3 Cullex Media, 1.5 ft 3
Underbedding, Type & Quantity Cullsan
®
Underbedding, Cullsan Underbedding, Cullsan Underbedding,
6 lb. 8 lb. 8 lb.
Exchange Capacity @ Salt 18,300 gr @ 4 lb. 20,200 gr @ 5 lb. 24,900 gr @ 6 lb.
Dosage Per Recharge 1
25,100 gr @ 9 lb. 29,400 gr @ 11 lb. 39,200 gr @ 14 lb.
27,500 gr @ 12 lb. 35,000 gr @ 17 lb. 43,500 gr @ 20 lb.
Efficiency at Rated Salt Dosage 5 4 lb. salt dosage: 5 lb. salt dosage 6 lb. salt dosage
4570 gr./lb. 4050 gr./lb. 4150 gr./lb.
Freeboard to Media 2 20.5 - 21.5 in. 17 - 18 in. 19.75 - 21.75 in.
Freeboard to Underbedding 3 42.0 - 42.5 in. 39.6 - 40.1 in. 53.8 - 54.3 in.
Salt Storage Capacity 250 lb. or 375 lb. 375 lb. 375 lb.
Rated Service Flow @ Pressure Drop 5.9 gpm @ 12 psi 7.2 gpm @ 12 psi 7.0 gpm @ 13 psi
Total Hardness, Maximum 75 gpg 99 gpg 99 gpg
Total Iron, Maximum (dissolved) 5 ppm 5 ppm 5 ppm
Hardness to Iron Ratio, Minimum 8 gpg to 1 ppm 8 gpg to 1 ppm 8 gpg to 1 ppm
140 mg/L to 1 mg/L 140 mg/L to 1 mg/L 140 mg/L to 1 mg/L
Operating Pressure 20 - 125 psi 20 - 125 psi 20 - 125 psi
140 - 860 kPa 140 - 860 kPa 140 - 860 kPa
Operating Pressure (Canada) 20 - 90 psi 20 - 90 psi 20 - 90 psi
140 - 620 kPa 140 - 620 kPa 140 - 620 kPa
Operating Temperature 33 - 120°F 33 - 120°F 33 - 120°F
1 - 50°C 1 - 50°C 1 - 50°C
Electrical Requirements 24V/60 Hz 24V/60 Hz 24V/60 Hz
Electrical Power Consumption, 3 Watts/35 Watts 3 Watts/35 Watts 3 Watts/35 Watts
Min./Max.
Drain Flow, Maximum
4 1.1 gpm 2.0 gpm 2.1 gpm
Recharge Time, Average 85 min. 64 min. 64 min.
Recharge Water Consumption 23.3 gal. 61 gal. 65 gal.
1 Capacities and corresponding salt dosages pertain to low hardness waters. Capacities given per recharge
2 Measured from top of media to top of inlet fitting (backwashed and drained)
3 Measured from top of underbedding to top of inlet fitting
4 Backwash at 120 psi (830 kPa)
5 Efficiency rating only valid at stated salt dosage on softminder models and is efficiency rated according to ANSI/NSF
Standard 44
2
Specifications