Casio EX-Z400 EN - Manual (Page 34)

34
Snapshot Tutorial
1.
In the REC mode, press [2] ( ) once.
2.
Use [4] and [6] to select the flash
setting you want and then press [SET].
When the “R Panel” menu item (page 139)
is “Hide” (so the Control Panel is not
displayed), pressing [2] (
) will cycle
through the available flash settings.
3.
Press the shutter button to shoot.
• For information about Flash Range, see page 177.
Using Flash (Flash)
Auto Flash
Flash fires automatically in accordance with exposure
(amount of light and brightness) conditions.
Flash Off Flash does not fire.
Flash On
Flash always fires. This setting can be used to brighten a
subject that normally comes out dark due to daylight or
backlight (daylight synchro flash).
Soft Flash Soft flash always fires, regardless of exposure conditions
Red Eye
Reduction
Flash fires automatically. This type of flash can be used to
reduce the chance of redness in the subject’s eyes.
Flash
[2] ( )
>
?
<
_
¥
N 12
A
Back lamp
Flashes orange while the flash is charging to indicate
that image recording is disabled.
• You will not be able to take another flash snapshot
until the lamp stops flashing orange, which
indicates that charging is complete.
<
indicates the flash will fire.