Chauvet S-MOVER DMX512 - Manual (Page 10)

Mounting
O R I E N T A T I O N
This fixture may be mounted in any position provided there is adequate room for ventilation.
R I G G I N G
It is important never to obstruct the fan or vents pathway. Mount the
fixture using, a suitable “C” or “O” type clamp. Adjust the angle of
the fixture by loosening both knobs and tilting the fixture. After finding
the desired position, retighten both knobs.
Hanging Clamp
•
When selecting installation location, take into consideration lamp
replacement access and routine maintenance.
• Safety cables should always be used.
•
Never mount in places where the fixture will be exposed to rain, high
humidity, extreme temperature changes or restricted ventilation. Note!
Clamp is sold separately.
4. O
PERATING
I
NSTRUCTIONS
Navigating the Control Panel
Access control panel functions using the four panel buttons located directly underneath the LCD
Display. NOTE: The display will turn off after 10 seconds if no buttons are pushed.
MODE
/ESC
Button Function
Used to access the menu or to scroll
through top-level menu items.
Scrolls through menu options in ascending
order
Scrolls through menu options in descending
order
Used to select and store the current menu
or option within a menu
UP
DOWN
ENTER
CONTROL PANEL
The Control Panel LED Display shows the menu items you select from the menu map on the next
page. When a menu function is selected, the display will show immediately the first available option
for the selected menu function. To select a menu item, press .
Press the button once to activate the control panel. Pressing the button
again will scroll through the different top-level menu options available. Use the and
buttons to navigate the menu options. Press the button to access the menu function
currently displayed or to enable a menu option. To return to the previous option or menu without
changing the value, press the button.
DMX Signal Indicator
Stage Mover Manual 10 2007-04-13/09:39