Chatsworth Products RIM-600 - Manual (Page 74)

RIM-600 Manual
74
Requesting a PowerGate Outlet Command
To request a PowerGate Outlet command, send an e-mail message to your RIM-600 Host with the
following information:
To:
Subject: rim600
username:
email:
command: powergate "" "" on/off/cycle
For example:
To: [email protected]
Subject: rim600
username: jsmith
email: [email protected]
command: powergate "Gear Rack #1" "Netgear switch #3" cycle
Requesting a Picture from a Camera
You can receive an e-mail with an attached picture from any camera configured in the RIM-600.
The picture will be captured when the RIM-600 receives the e-mail request.
To receive a picture, send an e-mail message to your RIM-600 Host with the following information:
To:
Subject: rim600
username:
email:
command: camera
For example:
To: [email protected]
Subject: rim600
username: jsmith
email: [email protected]
command: camera NY Datacenter
Requesting Help
You can receive a brief overview of how to use and format two-way e-mail commands by requesting
help.
Send an e-mail message to your RIM-600 Host with the following information:
To:
Subject: rim600
username:
email:
command: help
For example:
To: [email protected]
Subject: rim600
username: jsmith
email: [email protected]
command: help
74