beautypg.com

Supported technologies on cisco routers, Supported technologies – Cisco 7200 User Manual

Page 34

background image

Support Information for Cisco Routers

42

Cisco Active Network Abstraction 3.6 Virtual Network Element Reference Guide

OL-14112-01

DRP/0/3/CPU0:CRS-PE1#show running-config ipv4 virtual address

ipv4 virtual address 10.52.123.11 255.255.255.0

If the SDR is managed in-band the management IP address should be supplied by the customer.

The owner SDR (namely, the main router) presents all the modules that are installed on the chassis,
excluding the ports that belong to other SDRs.

The VNE of the SDR only displays the modules that are associated with the SDR in the Inventory
window of Cisco ANA NetworkVision, it does not display the fabric, fan and power supply (namely,
the shared modules).

Supported Technologies on Cisco Routers

The following sections list the objects and attributes that are supported on Cisco routers in
Cisco ANA 3.6 per technology:

Base Logical Components, page 43

Layer 1, page 43

IP, page 44

Routing Protocols, page 46

Ethernet (Physical), page 47

Physical Equipment, page 47

Ethernet (Logical), page 48

ATM, page 48

Frame Relay, page 50

HDLC, page 52

MPLS, page 52

VPN, page 54

QoS, page 55

Q-in-Q (Switch Port), page 56

Q-in-Q (Routed Switch), page 57

STP, page 57

Note

For more information about the objects and attributes described in this chapter, see Cisco Active Network
Abstraction Technology Support and Information Model Reference Manual, Version 3.6.