Using continuous shutter – Casio EXILIM EX-Z1050 User Manual
Page 78
78
SHOOTING A SNAPSHOT
NOTE
• The indicator “1sec” appears on the monitor screen
between Triple Self-timer shots. How long it takes for the
camera to get ready to shoot again after it shoots an image
depends on the image size and quality settings, whether or
not a memory card is loaded in the camera, and the flash
charge condition.
• No self-timer operation can be performed when recording
with the any of the following settings.
– Normal-speed Continuous Shutter, High-speed
Continuous Shutter
– “Layout” or “Auto Framing” BEST SHOT sample scene
selected
– “
Tracking” selected for “AF Area”
• The Triple Self-timer cannot be used when performing the
following recording operations.
– Recording with certain BEST SHOT scenes (Business
Cards and Documents, Whiteboard, etc., Old Photo)
– Recording with Flash Continuous Shutter
Your camera has four continuous shutter modes.
Using Continuous Shutter
Continuous
Shutter Mode
Description
Normal Speed
(Normal-speed
Continuous
Shutter)
Continually records images until memory
becomes full.
High Speed
(High-speed
Continuous
Shutter)
Continuously records at approximately
seven images per second. Images can
be recorded until memory is full. Image
size is fixed at 2M (1600 × 1200 pixels).
* Continuous recording speed using a
SanDisk Extreme
III 2.0GB SD card
after it is formatted by the camera.
(SanDisk and SanDisk Extreme are
registered trademarks of the SanDisk
Corporation.)
Flash Cont.
(Flash Continuous
Shutter)
Use this mode to record up to three
consecutive images, firing the flash for
each one.
B