GoPro HERO - Manual (Page 15)

28 29
/ Settings Mode
SPOT METER
Spot Meter is good for filming into a setting where the lighting is
different from where you are, such as filming the outdoors from within
a car or a shaded environment while standing in the sun. Spot Meter
automatically sets the exposure based on a single spot in the middle
of the image. When Spot Meter is turned on, [
] appears on the
camera status screen. The options for this setting are Off (default)
and On.
UPSIDE DOWN
If you mount your camera upside down, you might have to rotate the
files during editing. This setting eliminates the need to flip your video
or photos after capture when the camera is mounted upside down.
The default setting is Up.
Setting Description
Up Camera is used right-side up.
Down Camera is used upside down.
/ Settings Mode
QUIKCAPTURE
With QuikCapture, you can quickly turn your camera on and begin
capturing video or Time Lapse photos. The options for this setting are
On (default) and Off.
To Use QuikCapture to Capture Video:
With the camera powered off, press and release the
Shutter/Select
button. Your camera automatically powers on and begins capturing
video.
To Use QuikCapture to Capture Time Lapse Photos:
With the camera powered off, press and hold the
Shutter/Select
button for two seconds. Your camera automatically powers on and
begins capturing Time Lapse photos.
To Stop Recording:
Press and release the
Shutter/Select button to stop recording and
power off the camera.