CREATIVE 2030 - Manual (Page 57)

Configuring the Wireless LAN USB Adapter 4-11
Network Status 1. Double-click the Wireless Network Connection icon on the taskbar.
2. When the Wireless Network Connection Status
dialog box similar to Figure 4-12 appears, click the
General tab. This displays the connection status,
duration, speed and signal strength.
3. Click the Support tab. A dialog box similar to
Figure 4-13 that displays the address type, IP
address, subnet mask and default gateway
appears.
Figure 4-12:Wireless Network
Connection Status
dialog box
Figure 4-13:Wireless Network
Connection Status
dialog box
The Wireless Network
Connection status dialog box
will not appear if the Wireless
LAN USB adapter is not
currently connected to a
wireless network.