CREATIVE 2030 - Manual (Page 48)

Configuring the Wireless LAN USB Adapter 4-2
Configuring Settings 1. If the Configuration Utility icon does not appear on the taskbar, click Start ->
Programs (or All Programs)-> Network Blaster 2030-01 -> Network
Blaster Wireless LAN USB Adapter utility.
2. Double-click the Configuration Utility icon on the taskbar just near the clock
(see Figure 4-1). The Configuration Utility dialog box similar to Figure 4-2
appears.
3. Click the Link Info tab. The status of your wireless connection is displayed.
4. Click the Re-Scan button to locate and re-connect the network.
The Link Quality and Signal
Strength information appear
only in the default
Infrastructure mode, and
not in Ad-hoc mode.
Figure 4-2: Link Info tab
State box
Displays the MAC Address of the network device
which is currently connected to your Wireless LAN
USB adapter.
Current Channel box
Displays the channel that the
Wireless LAN USB Adapter is
operating in.
Current Service Set Identifier box
Displays the SSID of the connected network device