Canon DR-X10C - Manual (Page 38)

3-8
Chapter 3 Basic Operation
■ Document Feed Tray Extension
Pull out the tray extension as needed for the length of your
document.
Adjusting the Document Guides
The document guides normally extend at equal distances from
the left and right of the center of feeding so that your
documents are centered in the feed inlet.
However, each document guide has its own lock lever, so you
can load documents to the left or right of center by locking the
document guides at the appropriate positions.
■ Loading Documents at the Left Side
This example shows the procedure for loading documents
at the left side of the feeder.
1. Spread the document guides all the way to the left
and right.
2. Load your documents against the left feed guide.
3. Lock the left document guide (a) by pulling out the
lock lever, then slide the right document guide to the
right edge of your documents (b).
Locking the Document Guides