Canon DR-X10C - Manual (Page 108)

8-2
Chapter 8 ISIS/TWAIN Driver Settings
1.
Before You Start Using the Scanner
To use the DR-X10C with an ISIS/TWAIN-compliant application program, the DR-X10C must first be selected as the scanner to
be used. This section describes how to select the scanner using CapturePerfect 3.0 (an ISIS-compatible application program). As
the scanner selection procedure depends on the application program being used, refer to your application’s user’s manual if
necessary for instructions on selecting the scanner.
1. Click the [Start] button, then select [Programs] -
[CapturePerfect 3.0] - [CapturePerfect 3.0].
CapturePerfect 3.0 starts.
2. Select [Select Scanner] from the [Scan] menu.
The [Select Scanner] dialog box appears.
3. Select “CANON DR-X10C”, and click [Settings].
IMPORTANT
If [CANON DR-X10C] does not appear, try reinstalling the ISIS/
TWAIN driver.