beautypg.com

Decoder amplifier functions – CREATIVE Digital DTT 3500 User Manual

Page 17

background image

13

The Standby LED lights up when the
Power Adapter is connected to the
mains. Press the Power button to turn
on the Decoder Amplifier.

The CMSS Music LED will remain

illuminated after initial start-up. The
last used CMSS mode’s light will
illuminate for subsequent start-ups
from system standby mode.

The Optical LED also lights up after

initial start-up. The last used Dolby
Digital/PCM Audio input’s light will
illuminate for subsequent start-ups
from system standby mode.

The Digital DIN or Line In LED

lights up, depending on whether
Digital DIN or Analog Line In is
connected. The Digital DIN LED will
blink if a PC connected to the Decoder
Amplifier is off but a Digital DIN
input is connected. Turning on your
PC stops the LED’s blinking.

The indicator light for Dolby Digital

will illuminate automatically if a
Dolby Digital program is playing.
That is, when a Dolby Digital signal
passes through the Decoder’s
processor via the Optical,Coaxial or

Digital DIN (Dolby Digital/PCM Audio)
inputs.
1.

POWER:

Sets the system to “On”

or standby. When set to “On”, the
Standby LED above the power
button turns off.

2. SUBWOOFER, CENTER AND

SURROUND:

These controls

adjust the level of the indicated
channels. Their output level
should be balanced with the fixed
output level of the Left and Right
front Satellites.

3.

MASTER:

Adjusts the volume of

the entire system. The Master
volume knob is servo controlled
via the Remote Control.

4.

CMSS:

CMSS

(Creative Multi

Speaker Surround)

processes

analog program material.
Repeated presses of this button
step through four different
operation modes.
MOVIE: Creates a 5.1 speaker
soundfield appropriate for movie
or game enjoyment from an
analog sound source.

Decoder Amplifier Functions

2

9

6

7

1

3

4

10

5

8

10
11

12

Legend

Button

LED