Char-Broil 463243911 - Manual (Page 15)

1 5
5
6
Pull out the two knobs from control panel. Insert temperature gauge stem into the bigger hole above knob bezel, shown A.
Make sure the gauge is pushed in as far as it will go, then push the gauge downward until it clips into the panel, shown B/C.
Re-install the two knobs.
Temperature gauge stem
A
C
B
Back of the panel
Attach right side fascia to right side shelf using two #10x3/8” screws, 5mm lock washers and 5mm flat washers.
Only right side shelf shown for assembly, install left side shelf with fascia in the same way.
Right side fascia
Right side shelf
#10x3/8” screw
5mm lock washer
5mm flat washer
Temperature gauge
Knob
Knob bezel Control panel