Cortelco CP4400 - Manual (Page 8)

8
SETUP
NOTE: In all the setup menus, the chosen item will blink.
Set the Date and Time
1 With the phone on hook, press the MUTE button. The screen will display 1.
SET DATE
2 Press the MUTE button again. The year will begin to flash.
3 Use VOL+ and VOL- to adjust the year.
4 Press the MUTE button. The month will begin to flash.
5 Use VOL+ and VOL- to adjust the month.
6 Press the MUTE button. The day will begin to flash.
7 Use VOL+ and VOL- to adjust the day.
8 Press the MUTE button. The hour will begin to flash.
9 Use VOL+ and VOL- to adjust the hour.
10 Press the MUTE button. The minute will begin to flash.
11 Use VOL+ and VOL- to adjust the minute.
12 Press the MUTE button. The weekday will begin to flash.
13 Use VOL+ and VOL- to adjust the weekday.
14 Wait a few seconds and the time and date will be stored.
Set the Flash Time
1 With the phone on hook, press the MUTE button. The screen will display 1.
SET DATE
2 Press the VOL+ button. The screen will display 2 SET FLASH.
3 Press the MUTE button. The screen will display FLASH and the flash time.
4 Use VOL+ and VOL- to adjust the flash time. Note that 600 is the standard
flash time for the United States and Canada.
5 Press the MUTE button. The screen will display 2 SET FLASH.
6 Wait a few seconds and the screen will go to idle and display the date and
time