Cortelco CP4400 - Manual (Page 7)

7
INSTALLATION
Checklist of Parts
•
Conference Unit
• AC Adapter
• User’s Guide
• RJ 45 Cable (8 wire)
• RJ 11 Cable (4 wire)
• Junction Box
Note: If any of the parts are missing, please contact your dealer.
To Ensure Best Performance
•
Locate the unit in a quite environment. Avoid making calls in noisy environ-
ments.
• Keep papers and other objects away from the unit.
• Do not place on carpet or other similar surfaces.
• Make sure that the unit is at least 1 meter away from other electrical products
to avoid interference.
• Direct your voice toward the microphone.
• Do not move the unit during a call.
Connect to Power and Telephone Line
1 Connect the 8 wire cable to the EXT jack on the junction box and to the EXT
jack on the bottom of the telephone.
2 Connect the 4 wire phone line cable to the telephone jack and to the LINE
jack on the junction box.
3 Plug the AC power supply into an electrical outlet and into the junction box.
The LEDs will flash and the phone will beep when it is ready.